www.dpgauges.com.au - CMC Technologies Pty Limited
Unit 19, 77 Bourke Road ,
Alexandria ,
NSW 2015
Australia
Tel: +61 2 9669 4000
Fax: +61 2 9669 4111 |
|
Mid-West Instrument Pressure Limiting Valve Model 200 | |
| |
Mid-West Model 200 Pressure Limiting Valve |
| |
| The Mid-West Model 200 is used for protection of pressure gauges, transmitters and other instrumentation from over pressure. The model 200 "gauge minder" features a pressure limiting valve that blocks off excess pressure to the instrument, preventing calibration failure, internal damage, and "blowout" from over-ranging - a principle cause of instrument failure.
The model 200 is supplied with a set of (3) range springs designed to set the shutoff pressure point at any pressure from 50 PSI (3.4bar) to 5000 PSI (340 bar). The automatic shutoff valve is positive on closing and is non - chattering. Once closed, pressure need only be reduced approximately 10% of the set pressure to re-open the valve. No external reset is required. The accuracy of the instrument used with the model 200 is in no way affected up to the set point of the pressure shutoff.
|
| | |
|
| UPC code: | M35 |
|
| Manufactured by: | Mid-West Instrument |
|
| Made in USA |
| Payment Methods |
| Cheque or Direct Bank / Telegraphic Transfer |
|
|
| Ref | |
| Description | Mid-West Instrument Pressure Limiting Valve Model 200 |
|
|
|
|
