www.dpgauges.com.au - CMC Technologies Pty Limited
Unit 19, 77 Bourke Road ,
Alexandria ,
NSW 2015
Australia
Tel: +61 2 9669 4000
Fax: +61 2 9669 4111 |
|
Mid-West Piston Type Differential Pressure Gauge - For Sea Water 120M , 120N | |
| |
Mid-West Instrument Sea Water DP Gauge |
| |
| Mid-West Instrument has released a piston type differential pressure gauge for seawater applications.This is an option in the model 120-series filter minder dp gauge.
Differential pressure is sensed by the movement of a floating piston magnet against a calibrated spring.The gauge pointer, outside the pressure housing, followsthe movement of the piston magnet and indicates differential pressure.
One or two hermetically sealed S.P.S.T.or S.P.D.T.reedswitches are optionally available to provide high and/or low alarm or control.They may be adjusted within the set point rangeidentified in the switch rating table.A non-indicating differential pressure switch version is also available.(Only a single switch is available on Monel bodies)
Reversed pressure ports are optionally available to facilitate installation.
|
Midlwest Model 120 NA or 120 MA | Features:
-
Body materials: Aluminum-Bronze or Monel.Monel Spring and Internals.
-
Standard Ranges:0-10, 0-15, 0-20, 0-25 and 0-30 PSID.(For other ranges contact factory)
-
Accuracy +5% full scale ascending.
-
Working pressure 5000 P.S.I.G.(340 bar).
-
Over-range protection to rated working pressure.
-
Weather-resistant construction standard.
-
2-1/2", 3-1/2"or 4-1/2"round dial.
-
Shatter-resistant lens.
|
|
| UPC code: | M35 |
|
| Manufactured by: | Mid-West Instrument |
|
| Made in USA |
| Payment Methods |
| Cheque or Direct Bank / Telegraphic Transfer |
|
|
| Ref | |
| Description | Mid-West Piston Type Differential Pressure Gauge - For Sea Water 120M , 120N |
|
|
|
|
